All about laptops and netbook!
UMID M1 – design meets function
The UMID M1 will be available in two variants: the “High” version includes a 16GB SSD and is powered by an Intel Atom clocked to 1.33GHz, while the “Low” version comes with Linux preinstalled and has only 8GB flash storage and its Atom runs a bit slower too at 1.1GHz. Both versions have a 4.8″ touchscreen with a “wide” resolution of 1024 x 600 pixels, 512MB of fast 533MHz DDRII RAM, Bluetooth 2.0, also 802.11b/g wifi and HSDPA (with own SIM card slot), connection to other devices is established with USB2.0, but you can also use the microSD-card reader for synchronizing data with, for example, your smartphone. Also included is a 1.3MP webcam for video telephony via skype or other VoIP-based services, and everything is powered by a 2400mAh Li-ion battery.
See the rest here:
UMID M1 – design meets function
Tags: atom, blu, blue, devices, linux, microsd, opinion, other-devices, two-variants, UMID, usb, version-comes, video-telephony, voip
This entry was posted by admin on November 5, 2009 at 8:13 pm, and is filled under 10, 600, 8gb, Battery, GB, LED, UMID, UMPC, Uncategorized, atom, blu, blue, bluetooth, de, eee, flash, ha, he, intel, iv, linux, one, pda, ram, red, ssd, time, touch, usb, vice, wifi. Follow any responses to this post through RSS 2.0. You can leave a response or trackback from your own site.
No comments yet.
No trackbacks yet.
HowTo: Measuring hard disk performance with linux and ‘hdparm’
about 3 months ago - No comments
Measuring sequential disk performance with linux is easy – most distros (like ubuntu) come with a tool called hdparm , that is mainly used for tuning and optimizing hard disk parameters, but luckily it also includes simple benchmark functionality – for example the following command sudo hdparm -t /dev/sda gives me the following output: /dev/hda: Timing buffered disk reads: 176 MB in 3.01 seconds = 58.55 MB/sec Of course you need to substitute /dev/sda with the name of your raw disk device (for example, it might be /dev/hda for non-SATA disks) . Its impossible to get higher transfer rates that that from your disk. Hdparm reads at the very start of the disk for these tests (which is the fastest area of the whole harddisk) and using optimal access pattern
Foldable USB keyboard simplifies typing with your UMPC
about 3 months ago - No comments
Most of the UMPC and MIDs available today share the same disadvantage: most of the time the keyboard just doesn’t work well at those tiny key sizes, especially if you have large hands. What to do? One possible solution could be using one of these ultra-portable external keyboards with your UMPC! The device shown on the right for example, bearing the rather technical description “Targus PA875U01X”, weighs just 180 grams at a size of 280 x 108 x 9 mm (unfolded), with 68 full-sized keys in QWERTY layout – enabling easy and smooth ten-finger typing for the mobile email enthusiast
HowTo: Add 3G/HSDPA functionality to your eeePC 1000H
about 3 months ago - No comments
During the last few months, Asus has started selling the “eeePC 1000H GO” with internal 3G/HSDPA card for easy everywhere connectivity. So far so good, but what about all those thousands of customers that already bought an eeePC 1000H before? Are they doomed to use one of those ugly external USB 3G modems – a threat to your eeePCs health if you drop it accidentally and the USB stick destroys the USB port it was sticking in (if not even more)…
Foldable keyboard for your UMPC – an update
about 3 months ago - No comments
For all those users without free USB ports on their smartphones, PDAs, MIDs and other devices, or those with an aversion against cables in general, there are also bluetooth versions of those full-sized foldable keyboards I mentioned already on this blog few days ago – namely I’d like to make mention here of the “Freedom Universal Keyboard²” (from a company called Freedom Input Ltd) with its own two AAA sized batteries and – most important – bluetooth! The manufacturer claims that due to support for both HID mode (used and recognized by all PCs, most PDAs, UMPCs and smartphones) and SPP mode, a bluetooth serial port emulation protocol utilized by the blackberry family of smartphones for example, this gadget enjoys comaptibility to > 200 different devices. Sure is that every device with bluetooth and either Blackberry OS 4.0 and upwards, symbian OS v9, or windows mobile 5 & 6 ( both PPC and smartphone edition), as well as Windows 2000 and WinXP is supported without need to install any drivers. No mention of linux though, and what about windows CE??
Asus selling iMac clone with netbook core
about 3 months ago - No comments
I’m sure everyone knows those design-award-winning Apple iMac computers that look like just a flat panel LCD and keyboard standing on your desk, but contain a whole macintosh… Now Asus has realized the advantages of such a design and is selling a computer-inside-an-LCD too. The “Asus eeeTop ET1602″ has about the same specs as the average eeePC 1000H netbook (making guesses about the interior of this device very easy), namely intel Atom N270 clocked to 1.6GHz, 533MHz Frontside Bus, 1GB DDR2 RAM, the rather weak Intel 945G graphics chipset, 160GB SATA-II harddisk (spinning at only 5400rpm), connectivity is provided by 802.11 b/g/n wifi, bluetooth and 1000MBit LAN, the thing has a 1.3MP webcam and built-in stereo microphone – and so far, I could just as well have read the description from the package of my eee1000H instead, without any difference…
howTo: Jaunty Jackalope with custom netbook kernel
about 3 months ago - No comments
Now it has been over a week since I installed Ubuntu 9.04 “Jaunty Jackalope” on my netbook, and in the meantime I’ve been working on customizing things to my needs. One main tweak consisted of replacing the default “2.6.28-8-generic” kernel with the more appropriate “2.6.28-12-netbook-eeepc” kernel compiled by Adam McDaniel over at array.org , main reason was merely the unpleasant sound of the word “generic” to me, since this “generic” kernel was working quite well – there was no obvious need to replace it. But I still thought it would be nice to have the core of the operating system customized to my hardware.
"Viliv S5 Premium Air MID": premium UMPC with GPS?
about 3 months ago - No comments
Now Viliv is jumping on the UMPC train too: since several weeks the long-announced “VILIV S5 MID” is available in several configurations. The “Premium Air” version sports a 16GB SSD, 4.8″ touchscreen LCD with a resolution of 1024×600 pixels, and full 3G/HSDPA functionality – whereas the “normal” versions come equipped with 30 or 60 GByte 1.8″ HDD instead, 800×480 LCD only, and no wireless broadband at all. Both models have the same 24Wh battery, allowing for 5-6 hours of continuous use, and are available with either WinXP, Vista or Linux (unspecified distro) preinstalled, both weigh around 380 grams and have 802.11 b/g wifi, bluetooth 2.0 and external video connectors (for VGA, S-Video and Composite-video cables!), the whole controlled by a “Silverthorne” Intel Atom clocked at 1.33GHz and supported by 1GB RAM.
HowTo: make a small LED email notifier
about 3 months ago - No comments
I guess after my last articles bearing somewhat randomized topics it is time for a real “eeeGadget” again.. So, what about having multi-color LED signaling incoming email (and ICQ instant messages) for you, visually with various blinking colors for assorted message types, even when your netbook’s lid is closed, for example
dBird-notifier checks for twitter, ICQ, email
about 3 months ago - No comments
I refined the software part of my last project a bit. Now the thing consists of one main python script calling various subprocedures as separate threads, it has a nice colorful “parrot” tray icon (for closing the “application”), it listens on the dBus interface for alerts from various other software and shows three different types of incoming messages with a) respective system alerts (indicating message content and type), b) with a pop-up tray icon showing type of message by icon, and c) with some RGB LED wired to a RS232toUSB-adapter via a small picaxe08m microcontroller, which lights up in the corresponding color (twitter is turquoise, pidgin is purple, email is red)
USB mail notifier – final hardware and software revision
about 3 months ago - No comments
Over the past few weeks I’ve refined the design of my LED message notifier device that has been the topic of my last few articles. For those of you who aren’t familiar with how it works or what is meant: the notifier device inquestion is capable of lighting up a multi-color LED in the corresponding color when/if messages are received. It indicates several types of messages: instant messages received via Pidgin (green LED/purple LED), emails and RSS/Atom feeds received via Mozilla Thunderbird (red LED), and it also informs about new tweets on my Twitter account (turquoise LED)